Four, Welltec Flow Valves 4-1/2″ were run as part of the lower completion inside the previously run, cemented, and perforated 7” liner. One WFV™ was positioned in the planned oil zone at 9,285 ft (2,830m) MD along with at third party fracking sleeve and three additional WFVs were positioned in the planned gas zone between 8,907 – 9,005 ft MD (2,715m MD and 2,745m MD) with 50 ft (15m) spacing.
The two zones were separated by hydraulically set packers. The lower completion was run on a 4-1/2” frac string with the planned purpose of facilitating the fracing operation before being pulled and replaced by the upper completion.
The lower completion and frac string were run to TD without incident. But prior to the frac operation the 3rd party frac sleeve failed to open despite multiple attempts using coil-tubing. Welltec used computation fluid dynamics (CFD) modeling to evaluate the option of fracing through the WFV™ and determined the valves function would not be affected by this operation.
Deciding to proceed with this option, the Well Tractor, Well Stroker and Well Key were used to quickly open the WFV™ within the oil zone. The operator then continued with the planned frac without having to pull the completion or resort to other, alternative deconstructive solutions.
A proppant frac was initiated through the WFV™ using x-linked fluids and proppants. A total of 723 bbls was pumped up to maximum surface pressure of 7,100 psi (490 bar).
After completion and clean-up of the oil zone, Welltec opened all three WFV’s in the shallower gas zone on a single descent. This allowed the operator to evaluate the full flowing gas production prior to determining their desired choke settings. The three, different flow configurations on each of the WFV’s across the gas zone gave the operator multiple options to choke the flow as desired for optimum production.
Incorporating this new product, the operator was quickly able to overcome the challenges presented both by the new objective of producing oil as well as that from the malfunctioning, 3rd party frac sleeve.
This was the world’s first installation of Welltec’s Flow Valves and demonstrated the flexibility and ease by which it can be ordered, delivered, deployed and operated. Within six weeks the WFV’s were manufactured and delivered along with the modified Well Stroker and Well Key. Shortly thereafter they were run in this new well completion and performed flawlessly, despite being subject to unplanned contingency operations.
- First WFV™ installation
- First prop frac through a WFV™
- Three WFV’s opened in one run
- First job using newly modified, high expansion Well Stroker & Well Key tool string
TD: 2,950 mMD / 2,528 mTVD
MUD: 1.69 SG BRINE
WELL TYPE: OIL & GAS PRODUCER
MAX INCLINATION: 46°
MAX TEMPERATURE: 115°C
GOT A WELL CHALLENGE?
Share it with our experts and
get an answer to your problem
3 EASY STEPS